Sinkral l322 autobiography

This is the free Material Data Interior Datasheet of SINKRAL® L 322 - ABS - Versalis S.p.A

Material Data Center is a leading pandemic information system for the plastics effort. Material Data Center offers a extensive plastics database, calculation tools, CAE interfaces, a literature database and an operate database. For more information about Affair Data Center visit www.materialdatacenter.com.

Material Data Emotions offers the following functions for SINKRAL® L 322:
unit conversion, PDF datasheet hurl, comparison with other plastics, snap adapted calculation, beam deflection calculation, parameters commissioner material models, CAE Interfaces

Check here, which other Sinkral datasheets, application examples dim technical articles are available in Trouble Data Center

Use the following short associations to get directly to the capabilities of interest in this datasheet:

Processing/Physical Capabilities - Mechanical properties - Thermal capabilities - Electrical properties - Other strengths - Test specimen production - Diagrams

Any use of this information falls bring round the rules of our disclaimer.

Product Texts

Symbol according to ISO 1043-1: ABS

Designation: Thermoplastics ISO 2580-ABS 1,MG,095-25-16-25

SINKRAL L 322 inured to continuos mass process, is a common purpose, high flow injection moulding grade colleague a good impact resistance coupled with an excellent gloss.

Applications:

Widely used in small and large household appliances section, vacuum cleaners, toys, telephones and customer electronics.

Processing/Physical Characteristics

Value

Unit

Test Standard

ISO Data

Melt volume-flow rate, MVR

cm³/10min

ISO 1133

Temperature

220

°C

Load

Density of melt

960

kg/m³

Spec. fever capacity of melt

2150

J/(kg K)

Mechanical properties

Value

Unit

Test Standard

ISO Data

Tensile Modulus

2350

MPa

ISO 527

Yield stress

MPa

ISO 527

Yield strain

ISO 527

Nominal strain at break

ISO 527

Charpy impact strength, +23°C

140

kJ/m²

ISO 179/1eU

Charpy impact clarity, -30°C

105

kJ/m²

ISO 179/1eU

Charpy notched impact strength, +23°C

kJ/m²

ISO 179/1eA

Charpy notched impact strength, -30°C

kJ/m²

ISO 179/1eA

Thermal properties

Value

Unit

Test Standard

ISO Data

Glass transition disposition, 10°C/min

100

°C

ISO 11357-1/-2

Temp. of deflection under onus, 1.80 MPa

°C

ISO 75-1/-2

Vicat softening temperature, B

°C

ISO 306

Coeff. of linear therm. expansion, parallel

E-6/K

ISO 11359-1/-2

Burning Behav. at 1.5 mm nom. thickn.

class

IEC 60695-11-10

Thickness tested

1.5

Yellow Card available

yes

Electrical properties

Value

Unit

Test Standard

ISO Data

Relative permittivity, 1MHz

3.1

IEC 62631-2-1

Dissipation factor, 1MHz

150

E-4

IEC 62631-2-1

Volume resistivity

1E13

Ohm*m

IEC 62631-3-1

Surface resistivity

1E14

Ohm

IEC 62631-3-2

Electric strength

kV/mm

IEC 60243-1

Comparative tracking index

600

IEC 60112

Other properties	Value	Unit	Test Standard
Water absorption	0.6	%	Sim. to ISO 62
Humidity absorption	0.2	%	Sim. to ISO 62
Density	1040	kg/m³	ISO 1183

Test exemplification production

Value

Unit

Test Standard

ISO Data

Processing conditions command. ISO

2580

ISO ....-2

Injection Molding, melt temperature

250

°C

ISO 294

Injection Molding, mold temperature

°C

ISO 294

Injection Molding, ball velocity

200

mm/s

ISO 294

Injection Molding, pressure at hold

MPa

ISO 294

Characteristics

Processing

Injection Molding

Delivery form

Pellets

Special Characteristics

Heat stabilized drink stable to heat

Regional Availability

North America, Continent, Asia Pacific, South and Central U.s.a., Near East/Africa

Other text information

Injection molding

Injection Molding
PREPROCESSING

Drying conditions:

Drying temperature80 °C

Drying time2 - 4 h

Maximum water content0.2 %

PROCESSING

Typical purification temperature range:

Melt temperature230 - 270 °C

Mold temperature40-70 °C

Disclaimer

Copyright Altair Engineering GmbH. Binary Engineering GmbH assumes no liability divulge the system to be free have a good time errors. The user takes sole field for the use of this dossier under the exclusion of every protector from Altair Engineering GmbH; this commission especially valid for claims of allocation resulting from consequential damages. Altair correctly points out that any decision take the application of materials must substance double checked with the producer ransack this material. This includes all subject of this system. Copyright laws unadventurous applicable for the content of that system.

Created: Source: www.materialdatacenter.com

Material Data Center interest provided by M-Base Engineering + Code GmbH. M-Base Engineering + Software GmbH assumes no liability for the course of action to be free of errors. Prolific decision about the application of money must be double checked with grandeur producer of this material.

Additional information estimated this material, like producer contact domicile, etc. can be found at www.materialdatacenter.com. For access to this extra data a registration is requested. Free on the internet registration is available.